Mediant 8000
The Mediant 8000 VoIP Media Gateway is a scalable, IMS-ready, standards-compliant, high channel density system for wireline, wireless, cable, broadband access and Fixed-Mobile-Convergence networks.
![]()
Carrier-Grade High Availability
The Mediant 8000 offers robust architecture meeting service providers’ stringent requirements for high availability. This high availability architecture is based on cost-effective N+1 redundancy of the processing blades and load sharing of fans and power supplies.
Multiservice Media Gateway
The Mediant 8000 Media Gateway provides extensive support for regional PSTN interfaces, broad voice coder options, Signaling Gateway Interworking, control protocols and advanced security features, enabling mutilservice deployment flexibility for a variety of customers (ILECS, IOCs, CLECs, MSOs, large Enterprises and contact centers). The Mediant 8000 can be used for backhauling TDM over IP, part of class 4 & 5 TDM switch replacements, IP connection, IP service node, IP Centrex Application and as a PacketCable gateway. In the wireless/cellular space, the Mediant 8000 is ideal for UMA and Femtocell applications.
High Level of Scalability
The Mediant 8000 is a modular platform which can scale up to 16,000 protected channels, allowing customers to begin with a low capacity entry point and later extend to a higher capacity by increasing the number of processing blade modules.
All-IP Evolution
With the introduction of Next Generation networks, there is a growing demand for IP to IP transcoding in peering, access and Fixed-Mobile-Convergence scenarios. The Mediant 8000 has the flexibility to primarily be installed as a classic VoIP Media Gateway, and in parallel accommodate the growing demand of IP peering as PSTN interfaces are gradually being phased out.
True Network Convergence on a single platform
The Mediant 8000 offers a high voice quality ranging from low-bit rate to wideband coders. This enables true network convergence between mobile/wireless networks and fixed line, cable and broadband networks on a single media gateway platform.
Broad PSTN Interfaces Options and Protocols
The Mediant 8000 provides the flexibility to be globally deployed, interfacing with all popular PSTN interfaces, including E1, T1, J1, DS3 and OC3/STM1.
Migration from TDM Class 5 Exchange to NGN
In addition to the connection of Enterprises on PRI/ISDN and MFC/R2 interfaces to the NGN, the Mediant 8000 can be used as a V5.2 Access Gateway for connecting V5.2 Access Networks installed base to the NGN thus retiring legacy Class 5 Switches while protecting investment in Enterprises and Access Networks equipment.
Advanced Security Suite
With the advent of VoIP, security has become a mandatory requirement. The Mediant 8000 addresses service providers and large enterprises security concerns, offering advanced security capabilities which include Interface Separation, SRTP for media, IPSec for control, OAM and TLS and PKI for SIP.
TM: A Certification Mark of NIST, which does not imply product endorsement by NIST, the U.S. or Canadian Governments.
| Capacity | Up to 16,000 protected VoIP/GSM/UMTS channels |
| Voice Coders | High Definition Voice Codecs: G.722, G.722.2 (Wide Band AMR), G.729.1 ((Wideband G.729) ,EVRC, RTA-WB Wireline: G.711, G.722, G.723.1, G.726/7, G.729A/B, EG.711, MS GSM, iLBC GSM/UMTS: GSM-FR, GSM EFR, AMR, AMR-WB CDMA: EVRC, EVRC-B, QCELP 8k, QCELP 13k Cable: G.711, G.726/7, G.723.1, G.728, G.729E, G.729A/B, iLBC Independent dynamic vocoder selection per channel (within each group) Not all coders can be used simultaneously. Some coders will result in channel density degradation |
| Echo Cancellation | G.165 and G.168 compliant |
| Fax Support | Fax/Modem Detection Control, T.38 (IP) compliant Group 3 fax relay and fax bypass (automatic fallback to G.711) support |
| DTMF | Packet side or PSTN side detection and generation, RFC 2833 compliant |
| Voice over Packet Capabilities | Call progress tones, VAD, CNG, Dynamic programmable jitter buffer, DTMF detection and generation, E911 CAS support |
| PSTN | ISDN PRI, SS7/MTP2/3, CAS, MFC-R2, MF-R1, V5.2 |
| SIGTRAN |
|
| IP Transport | IETF RFC 3550, RFC 3551 RTP/IP Transport, TCP, UDP CDMA: IETF RFC 2658 and RFC 3558 RTP/UDP/IP UMTS: Nb IP User Plane and IPBCP over Mc per 3GPP |
| Media Gateway Control Protocols | MGCP (RFC 3435), TGCP, MEGACO (H.248, RFC 3015), SIP (RFC 3261) 3GPP: CS Mc - TS 29.232, IMS Mn - TS 29.332 |
| Security |
|
| Management | Element Management System, SNMP v2 over IPSEC/SNMP v3, Command Line Interface (CLI) |
| Maintainability | All shelf modules are hot swappable, including boards, power supplies, fans |
| Redundancy Scheme | System Controller and Ethernet Switch blades: 1+1 Power supplies: N+1 Load Shared Media Gateway blades (including PSTN interfaces): N+1 Optical Interfaces (PSTN): 1+1, APS protected |
| Interfaces | PSTN: Up to 8 x OC-3/STM-1 Optical ports, each 1+1 APS protected, or up to 24 x T3 (DS-3) Copper Coax ports or up to 252 E1/T1/J1 spans IP: Dual Redundant 100/1000 BASE-T (aggregated) Ethernet ports, with Multi-VLAN Interfaces support (OAM, Control, Media) Clock Synchronization: BITS/SETS (GR-1244 Stratum-3 and G.813 compliant), line synchronization (via STM-1/OC-3 link or DS1 trunk) |
| Enclosure | 21-slot, 12U cPCI chassis |
| Dimensons (H x W x D) | 533 mm x 483 mm x 480 mm (21 x 19 x 18.9 inches) |
| Weight | Approx 60 lbs. (27 kgs.), unloaded Approx. 88 lbs. (40 kgs.), fully loaded |
| Mounting | Per EIA Standard RS-310-C in 19-inch rack |
| Midplane |
|
| Power | -48 V DC Dual Feed, with 3 DC Power modules |
| Cooling | Replaceable fan trays & filters |
| Telecommunication Standards3 | FCC part 68 TBR4 and TBR13 |
| Safety and EMC Standards |
|
| Environmental3 | NEBS Level 3: GR-63-Core, GR-1089-Core, Type 1 & 3, ETS300 019 |
1 Reduced channel capacities
2 Future releases
3 Designed to meet – formal approval pending
- IMS ready, carrier-grade, High-Density VoIP Media Gateway
- Cost-effective Media Gateway, scalable up to 16,000 protected VoIP channels
- Ready for all-IP networks using integrated IP-To-IP and transcoding applications
- Enables true convergence between multiple carrier networks on a single media gateway platform
- Provides high voice quality, supporting a wide range of low bit-rate to wideband high-definition voice coders
- Provides rich PSTN interfaces and signaling, supporting all industry standard control protocols
- Offers advanced security suite for enterprise and VoIP carrier networks, complying with U.S. Department of Defense security requirements
- Deployed globally at Tier 1, 2 and 3 service providers and large enterprise networks by leading OEMs and system integrators
-
Application Notes
-
AudioCodes Media Gateways - The Perfect Replacement for Nortel Passport
(PDF, 807.9KB)
Release Date: Feb 02, 12 -
Carrier/Service Provider Applications – Quality, Cost-effective Solutions for Every Network
(PDF, 1.5MB)
Release Date: Mar 13, 09
-
-
Case Studies
-
Trunking Solution for Call Center
-
Cable Telephony
-
Compliance and Regulatory Information
-
AudioCodes Policy on Environmental Legislations
-
LTRT-27701 8000 Series Regulatory Information for TP-6310 Blade
(PDF, 326.4KB)
Release Date: Nov 30, 108000 Series Regulatory Information for TP-6310 Blade -
LTRT-27801 8000 Series Regulatory Information for TP-8410 Blade
(PDF, 332.5KB)
Release Date: Nov 30, 108000 Series Regulatory Information for TP-8410 Blade
-
-
Datasheets
-
VoIP Gateway
-
-
Interoperability Configuration Guides & Scenario Files
-
Certified Interoperability with Standard PBXs by AudioCodes for Genesys Labs
(PDF, 438.0KB)
Release Date: May 25, 10
-
-
Product Lifecycle Bulletins
-
0152 PSTN E1T1 Framer and Line Interface Component Replacement on 1610 Blade Family -Product Notice.pdf
(PDF, 257.5KB)
Release Date: Jun 27, 12PSTN E1T1 Framer and Line Interface Component Replacement on 1610 Blade Family -Product Notice -
Product Notice 0101
-
EoS for SW Version 5.2
-
Product Notice 0088
-
Product Notice 0081
-
Product Notice 0060
-
Product Notice 0055
-
-
White Papers

